• IDWedgeKB Virtual Com Serial Port INF driver signed for Windows

    • August 8, 2017
    • Charles C.

    IDWedgeKB serial port usb inf driver files. The actual driver is already on your Windows Machine – usbser.sys but an inf file tells windows to associate this driver with the IDWedgeKB USB.org vendor ID.  We also signed the file so there isn’t a scary windows security warning. idwedgekb_virtual_serial_port_inf_driver_signed.zip Here are directions…

  • IDWedgeKB Virtual Com Port Driver inf installation Windows 10 x64

    • Charles C.

    Installing IDWedgeKB Virtual Serial Port on Win10 Pro x64 This assumes the USBSerialPort parameter has been set to true in the config.txt file inside the IDWedgeKB memory. See the user manual for details. Copy inf files from IDWedgeKB drive to desktop Plug in IDWedgeKB – if the PC asks for…

  • Sending TKWK files on M310 and M310s

    • June 8, 2017
    • Charles C.

    How to send TKWK* files from IDVisor m310 or IDVisor M310s to TokenWorks Support At times, we may ask clients to send us some diagnostic files from the device to fix or update the software.  These directions detail the process of finding and sending those files. On the M310 or…

  • IDWedge version 3.5

    • December 23, 2016
    • Charles C.

    New IDWedge version 3.5 software update:  includes support for M420 barcode scanner. Down the this file  IDWedge FormFiller 3.5-zip.exe.zip       It is a zip file, so first unzip it. You’ll have an executable which requires a pass phrase to run.  Please call 800 574 5034 for the pass phrase….

  • AgeVisor Aloha POS Boot Order

    • September 22, 2016
    • Charles C.

    Background:  09/22/2016 Client running AgeVisor on Aloha terminal and recently replaced Aloha terminal with because original was damaged. Aloha terminal running  Windows Embedded POS ready version 7 Client was unable to get AgeVisor to run on autoboot – but AgeVisor would work if they ran it after system booted. Since code…

  • Height Weight Fields formats DL Drivers License Format IDParser DLL

    • August 18, 2016
    • Charles C.

    Height and Weight fields There are two systems for measuring the Ht and Wt fields, English and Metric. Cards issued in USA will use English system and cards issued elsewhere (Canada) will use metric. From the AAMVA spec: Height: Height of cardholder.  Inches (in): number of inches followed by ”…

  • IDWedge Pro configuration for QuickBooks QB Point of Sale POS

    • May 23, 2016
    • Charles C.

    Introduction Date 5/23/2016 This post explains how to configure IDWedgePro to work with QuickBooks (QB) Point of Sale (POS) software (version 12.0) This applies to IDWedgePro version 1.0.1.2 How to enable use of SendInput instead of SendKeys.Send() Note: be careful when copying and pasting <add key=”SendKeys” value=”SendInput”/> into the config file…

  • Cleaning M310 / M260 / M280 Barcode Scanner

    • January 30, 2016
    • Charles C.

    Background This document describes how to clean the barcode scanner on the m310, m260 and m280 that becomes slow or does not read at all. The 2D Bar Code scanner slot naturally collects the accumulated material  (dirt) on the surface on drivers’ licenses.  Sometimes small bits of the license actually…

  • IDWedge Version 3.4.2

    • January 28, 2016
    • Charles C.

    New IDWedge version 3.4.2 software update:  Added support for M420 barcode scanner   Down the this file   IDWedge FormFiller 3.4.2-zip.exe      It is a zip file, so first unzip it. You’ll have an executable which requires a pass phrase to run.  Please call 800 574 5034 for the pass…

Prev Next