Here is a simple way to mount the Z22 CounterTop, MSR or Mobile case. Using two overlay cabinet hinges, the scanner can be mounted to a flat surface, yet still rotate up to allow access to the soft reset hole on the bottom. The images below show two hinges purchased from homedepot. Just Remove two of the rubber feet on the bottom of the scanner, run the screw though the hinge as shown in the images below and then screw the hinges to the countertop.
Liberty Self-Closing Full-Overlay Hinge 1-Pair
http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?productId=202066905
