Posts for

Title Description Last Modified
IDVisor Countertop Manuals

IDVisor Countertop Quick Start Guide [Rev 1] IDVisor Hardware User Manual [Rev 1.1] IDVisor Software User Manual [v5.5]

09/18/14
11:07 am
IDVisor Mobile Manuals

IDVisor Mobile Quick Start Guide [Rev 1] IDVisor Hardware User Manual [Rev 1.1] IDVisor Software User Manual [v5.5]

09/18/14
11:05 am
IDWedge Version 3.3

New IDWedge version 3.3 software update: This version adds new fields  Country and 2nd address.  Also adds option for first name initial (this is in addition to middle name initial). Parsing fixes  – Fix New Mexico 2013 Magnetic Stripe –

04/22/14
3:24 pm
ID Visor Touch – File Store Error – Corrupt SD Card – Fix

If your Touch unit is giving a file store error message or something similar, you can fix it yourself with this 20 minute procedure. This message tends to appear due to the SD card having corrupt files on it and

04/17/14
8:35 am
Installing Palm Desktop Software

NOTE: to install the Palm Desktop software, you must be logged into the PC as an Administrator and to use the Palm Desktop, you must be logged into the PC with the SAME Administrative user name. Determine version of the

04/06/16
9:53 am
IDWedge Formula Error – Unable To Send Keys

Problem: Customer had an IDWedge that was not filling out info. Instead it would give an error message saying: “Formula Problem: Unable to SendKeys”. The IDWedge would fill out the form in IDWedge without a problem, but once program was

12/27/13
3:37 pm
IDVisor Z22 Software Update – 4.72 and Procedure

IDVisor Z22 Software Update – Version 4.72 CardVisorZ22_4.72    (Note: Zip file – download and unzip -> cardvisor_4.72.prc which gets installed on scanner) Above is a link to the most recent version of software for the IDVisor Z22 Mobile and CounterTop

03/23/16
10:30 am
How to Set the Clock on the IDVisor Touch (Old and New Software)

If the clock on the IDVisor Touch ID Scanner is not set, then the scanner will prompt you to set the date and time before it will allow you to use the age verification software. This is done because the

10/15/13
4:49 pm
Sample PDF417 2D barcodes

Sample 2D Barcodes Sample barcodes

05/26/16
10:07 am
Installing Palm USB 64-Bit Driver For Palm Desktop On 64-Bit version of Windows OS

If you are having trouble hotsyncing your Z22 ID scanner, it may be because you are using a 64bit windows operating system.   The Palm Desktop software is compatible with 64bit operating systems, but the USB hotsync drivers supplied with the

07/08/14
1:54 pm
Palm 64bit Win 7 USB driver

64 bit USB Windows Driver for Palm/Garnet OS Updated On 3/2/2012 12:00 Version 1.0 Views 34728 Category Drivers License Aceeca Software License Win 7 USB driver 64 bit zip file Here is a zip file for the USB driver Palm

10/15/13
5:00 pm
IDVisor Z22 Software Version 4.60

Here is a download link to the CardVisorZ22_4.60 Software.

04/17/14
8:29 am
IDVisor Smart Plus Not Reading Age On The Screen (Only Showing An OK Alert)

Problem Description: IDVisor Smart Plus only showing an OK alert but will not display age.       IDVisor Smart Plus only showing scan results but will not display the age. This is due to the display size being set

02/18/19
6:18 pm
IDVisorSentry Installer 2.0.1.3

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.1.3.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.1.x.exe and run the installer. you will see a driver installer

02/18/19
2:43 pm
Age Will Not Display Correctly On IDVisor Smart Plus

Problem Description: Age will not display correctly on the screen.     Customer age is not displaying correctly after a scan. This issue may be caused by the font size on the device being set to the largest setting. Please

02/19/19
3:18 pm
How To Upload Tag List To IDVisor Smart/Smart Plus

Follow the directions provided to upload a tag list to your IDVisor Smart/IDVisor Smart Plus.   1. Create Tag List in Microsoft Excel. The column format should be as followed: Last Name, First Name, ID Number, Date of Birth (MMDDYYYY),

02/08/19
4:45 pm
Protected: Protected: Protected: IDParser Server SDK 3.6

There is no excerpt because this is a protected post.

02/06/19
2:25 pm
Protected: Protected: Protected: IDParser Server SDK 3.5

There is no excerpt because this is a protected post.

02/04/19
12:04 pm
ServerParser Key Diagnostics

This post contains instruction and the program you will need to to run the ServerParser key diagnostic. You will have to download this file: Ekag20nt.zip and follow these instructions: How-to-run-the-Key-Diagnostic.pdf Summary: Download both files. Unzip the Ekag20nt.zip to Ekag20nt.exe  and

01/31/19
6:42 pm
Protected: Protected: IDParser Server SDK 3.4

There is no excerpt because this is a protected post.

01/23/19
12:55 pm
AgeVisor POS 2.0.0.6 Installer and Updater

Changes in ver 2.0.0.6 include a Grandfathered feature, accessed via the age threshold screen: The Grandfather clause feature makes it so that the customer can have the age alerts work properly if the state raises the age limit for an

01/17/19
11:15 am
How To Delete Data Off IDVisor Smart/Smart Plus

Please follow the steps provided to delete data off your IDVisor Smart/Smart Plus.   1. From the IDVisor Smart home screen go to Setup.                   2. After entering the Setup Menu please

01/16/19
5:02 pm
IDWedgeKB Android Serial Terminal Samsung Note 8

IDWedgeKB Android Serial Demo Watch IDWedgeKB work as a drivers license / ID Scanner natively connected to Android Samsung Note 3 The IDWedgeKB USB Serial driver works with Android. Here is a video showing it working with Samsung Note 3 and DroidTerm (please excuse the

01/11/19
1:13 pm
IDVisorSentry Installer 2.0.1.2

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.1.2.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.1.x.exe and run the installer. you will see a driver installer

01/02/19
3:50 pm
IDVisorSentry Installer 2.0.1.1

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.1.1.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.1.x.exe and run the installer. you will see a driver installer

12/21/18
2:53 pm
IDParser Node Lock SDK 3.5

New Windows SDK for our Node Locked Drivers License parsing software. Download this file and unzip it to your PC: IDParser-NodeLock-SDK-3.5.zip You’ll have Visual Studio C# and VB projects with documentation. Unactivated (30 day Demo mode) parsing software converts each

12/10/18
4:55 pm
IDVisorSentry Installer 2.0.1.0

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.1.0.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.1.x.exe and run the installer. you will see a driver installer

12/06/18
1:15 pm
Power Supply – AgeVisor Touch

Replacement AgeVisor Touch Power Supply Lost or Damaged your AgeVisor Touch Power Supply? Here are some recommended power supplies on Amazon that we’ve reviewed and/or tested that you can purchase to replace a misplaced or damaged AgeVisor Touch Power Supply.

02/19/19
8:49 am
TestParsingDLL with Interface

This is a beta release of the PdfLibTest.dll (barcode) and MagLibTest.dll modified to support an Interface to the library. The project below contains a button event that demonstrates the interface for the both libraries: The link below is a VS2015

12/03/18
5:16 pm
IDVisorSentry Installer 2.0.0.9

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.9.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

11/29/18
3:36 pm
IDWedgeKB Programming Tutorial Video

Follow the steps provided in the video for instructions on how to program an IDWedgeKB to work with your form.     If after attempting these steps you are still unable to program the IDWedgeKB to work with your form

11/28/18
3:28 pm
IDParser node lock SDK 3.4.1

New Windows SDK for our node locked drivers License parsing software Download this file and unzip it to your PC:IDParser-NodeLock-SDK-3.4.1.zip   You’ll have Visual Studio C# and VB projects with documentation. Unactivated (i.e. Demo) parsing software converts each 3rd character

11/26/18
12:04 pm
IDParser scanner lock 3.6 raw data

This post has an archive of a VS2008 project, that uses version 3.6.0.0 parsing DLLs, to save raw data to a text file: the raw data is saved to your PC at the path C:\Tokenworks\RawData.txt TokenWorksDLLRawData.zip

11/21/18
5:04 pm
On-Screen Keyboard not showing up on IDVisor Smart/Smart Plus

Please follow the troubleshooting steps below if you do not see the on-screen keyboard appear on your IDVisor Smart or Smart Plus.                         1) Swipe down on the screen

11/08/18
6:05 pm
IDVisorSentry Installer 2.0.0.8

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.8.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

11/08/18
2:55 pm
How To Export Data on AgeVisor Touch

Please follow directions below on how to Export Data on an AgeVisor Touch. 1) From the Main Screen go to Data.                       2) On the Data screen you will select

11/20/18
3:13 pm
How To Export Data From IDVisor Smart and IDVisor Smart Plus

Please follow the directions below in order to export data from the IDVisor Smart/Smart Plus through Manual or Wireless export.   Manual Export: 1) Select Setup from the Main Screen.   2) Select Database from list of options.   3)

11/02/18
4:22 pm
IDVisorSentry Installer 2.0.0.7

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.7.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

10/25/18
11:49 am
Protected: IDParser Server SDK 3.3

There is no excerpt because this is a protected post.

10/16/18
5:51 pm
IDVisorSentry Installer 2.0.0.6

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.6.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

10/15/18
4:56 pm
AgeVisorTouch – Controlling Windows 10 Update

AgeVisorTouch V. 1.0.1.8 has a new feature that let’s you control when/if Windows 10 will update. Windows 10 will automatically update the OS at the worst possible times – like in the middle of a busy work day – so

10/08/18
1:22 pm
IDVisorSentry Installer 2.0.0.5

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.5.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

10/04/18
2:12 pm
IDWedgeKB Firmware Update 2.9

How to update IDWedgeKB to Firmware 2.9.1 this version fixes a bug that was filtering dash character ( – ) from the output Download the update file – IDWedgeKB_2.9.1.zip Download the IDWedgeKB User manual (V2.9 firmware) – IDWedgeKB-Users-Guide-Version-1.15.pdf Download IDWedgeKB

10/05/18
2:48 pm
Connecting to WiFi on IDVisor Smart and Smart Plus

Follow the steps below in order to connect your IDVisor Smart or Smart Plus to WiFi.   Select Setup.                 Select Wifi.                 Select your WiFi

11/02/18
2:54 pm
WiFi Connectivity Issues “Authentication Problem”

When experiencing issues connecting to WiFi or receiving an “Authentication Problem” error message on your IDVisor Smart or Smart Plus. Please try the following troubleshooting steps below. Note: Before beginning any troubleshooting steps please try to log on to idscanner.us

11/02/18
2:52 pm
AgeVisor Touch Does Not Power Up

Follow the troubleshooting steps provided below when you are having trouble powering on your AgeVisor Touch. Note: Before beginning troubleshooting steps please determine if your AgeVisor Touch is using a 12V or 5V power supply by viewing the images below.

09/27/18
12:57 pm
Problem Charging IDVisor Smart or Smart Plus

Please follow the provided troubleshooting steps when experiencing problems charging your IDVisor Smart or Smart Plus With Micro USB Cable If having issues charging with the micro usb cable provided with your Smart or Smart Plus: 1. Ensure the cable

09/21/18
10:57 am
How to Install IdentiFake

Download and Run the IDVisor Sentry + IdentiFake Installer Follow the Instructions Below   Once Activated you need to shutdown the service, then restart the service. Start IDVisor Sentry Default Pin Code is 5678 Now Navigate back to the home

09/19/18
8:11 pm
IDVisorSentry Installer 2.0.0.4

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.4.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

09/13/18
10:33 am
“DB Verification Failed” “Storage Card Directory Not Found”

Please follow these troubleshooting steps when encountering a DB Verification Error or Storage Card error on your IDVisor Pro. When this error occurs the program will continuously try to load the software but will fail to due a corrupt or

09/28/18
1:46 pm
IdentiFake Library Update

AssureID Sentinel Document Library update: October 2018  – version 18.10.23.59 for AssureID Engine V5.1.23 This library update is for IDVisorSentry users with the Identifake document verification system. Important Note: This update requires Admin privileges to run, and during the installation

10/26/18
3:03 pm
IDVisorSentry Installer 2.0.0.3

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.3.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

08/29/18
11:04 am
IDParser Cloud SDK 1.12

Visual Studio C# client code which demonstrates web based ID parser. Down this file IDCloudParser-SDK_v1.12.exe.zip       It is a zip file, so first unzip it. You’ll have an executable which requires a pass phrase to run.  Please call 800 574 5034 for

08/28/18
12:40 pm
Eleckey Key Engines

Below is an archive that contains two versions of the Ekag20nt.exe key detection engine.  the two version are: V2.8 which is the currently deployed version of TokenWorks apps and parser. and V2.9 which is the next version of code that

08/27/18
3:19 pm
IDWedgeKB Firmware Update 2.8

How to update IDWedgeKB to Firmware 2.8 this version adds the rest of the control word combinations, like {ALTSHIFT}, {CTLALT}, etc. Instructions Download the update file –IDWedgeKB_2.8.zip Download the IDWedgeKB User manual –IDWedgeKB-Users-Guide-Version-1.14 -v2.8 firmware.pdf Download IDWedgeKB Firmware upgrade procedure

10/03/18
11:29 am
IDVisorSentry Installer 2.0.0.2

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.2.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

08/13/18
3:40 pm
IDParser node lock SDK 3.3.1

New Windows SDK for our node locked drivers License parsing software Down the this file and unzip it to your PC:IDParser-NodeLock-SDK-3.3.1.zip You’ll have Visual Studio C# and VB projects with documentation. Unactivated (i.e. Demo) parsing software converts each 3rd character

08/13/18
10:25 am
IDWedgeBT Keyboard Application Updater 2.1

The IDWedgeBT Keyboard Application Updater requires a special programming cable.  The application has on screen instructions on how to perform the update. The quick guide contains screen shots of the procedure. IDWedgeBT-Application-Upgrade-Quick-Guide-Rev-2.0 Download the archive below and extract/unzip to a

08/14/18
6:37 pm
IDWedgeKB Firmware Update 2.7

How to update IDWedgeKB to Firmware 2.7 Formula bug fix to inserts time/date into Excel  e.g. {CTLSHIFT :}{TAB}{CONTROL ;} Instructions Download the update file – IDWedgeKB_2.7.zip Download the IDWedgeKB User manual  – IDWedgeKB-Users-Guide-Version-1.13 v2.7 firmware.pdf Download IDWedgeKB Firmware upgrade procedure

08/16/18
12:06 pm
IDVisorSentry Installer 2.0.0.1

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.1.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

07/27/18
3:12 pm
IDWedgeKB Backup Software Update Procedure

This is procedure is a backup update process in the event an IDWedgeKB is firmware is corrupted and it’s not possible to enter the standard flash drive mode It should only be done after consulting with TokenWorks tech support.  

07/19/18
11:25 am
IDWedgeKB Firmware Update 2.6

How to update IDWedgeKB to Firmware 2.6 Alberta Update for AB Drivers Licenses issued after 5/1/2018 Instructions Download the update file IDWedgeKB_2.6.bin.zip_ Download the IDWedgeKB User manual  – IDWedgeKB-Users-Guide-Version-1.11 for firmware 2.4.pdf Download IDWedgeKB Firmware upgrade procedure (same as shown below)  Upgrading-IDWedgeKB-Firmware.pdf

07/20/18
7:46 am
IDVisorSentry Installer 2.0.0.0

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-2.0.0.0.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 2.0.0.x.exe and run the installer. you will see a driver installer

07/20/18
10:18 am
Error: IDVisor Smart fails to launch

This could be an issue with a corrupted database. If this is the first time launching the software, navigate to the File Manager app and then go to the Phone Storage (Or Internal shared storage) -> Documents -> IDVisor Smart

07/16/18
10:21 am
IDWedgeKB Firmware Update 2.51

IDWedgeKB Firmware 2.51 There was a bug in version 2.5 which looked for “2.4” instead of “2.5” in the config.txt file and when not found warned that code version in config.txt was wrong. Instructions Download the update file IDWedgeKB_2.51.bin.zip Download the

06/29/18
12:05 pm
IDVisorSentry Installer 1.0.0.9

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-1.0.0.9.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 1.0.0.x.exe and run the installer. you will see a driver installer

06/22/18
10:36 am
IDWedge Pro: How to create formulas

How to Create a Formula in IDWedgePro Follow these steps to create a simple address formula, used to fill in and address in an Excel spread sheet. Launch the formula page from IDWedgePro by clicking on Settings->Formula Create an excel

06/13/18
1:44 pm
IDWedge Pro: Backing Up and Restoring Formulas

How to Backup/Restore Formulas for IDWedgePro This post will guide you on how to backup/restore your formulas you created in the IDWedge Pro program. It also guides M280 users on how to backup their Scanned Images.   Step 1: From

06/13/18
10:26 am
IDWedge Pro Installation and Setup Guide for M260/M280/POS HID Barcode Scanner

IDWEDGE PRO INSTALLATION GUIDE This guide provides instructions on how to install and setup your IDWedge Pro Software Step 1: Download and extract the latest IDWedgePro Installer from: https://www.idscanner.us/software-updates/idwedge-pro-updates/ NOTE: For existing users re-installing software or moving to a new

06/20/18
4:24 pm
Activation Error: The request failed with the error message Authentication Required

If you are receiving the following error message when trying to activate our software (IDWedge Pro, AgeVisor, IDVisor Sentry, IDVisor Sync) it may be caused by a firewall or security feature on your PC. To bypass this error message you

06/11/18
1:51 pm
IDWedgeKB Firmware Update 2.5

IDWedgeKB Firmware 2.5 Update for 2.5 – Alberta Canada PDF417 Instructions Download the update file IDWedgeKB_2.5.bin_ Download the IDWedgeKB User manual  – IDWedgeKB-Users-Guide-Version-1.11 for firmware 2.4.pdf Download IDWedgeKB Firmware upgrade procedure (same as shown below)  Upgrading-IDWedgeKB-Firmware.pdf Instructions repeated from  – Upgrading-IDWedgeKB-Firmware.pdf Unzip

06/08/18
4:38 pm
M260 DL Parsing Scanner Diagnostic

The M260 Diagnostic application is a tool you can use to diagnose, troubleshoot and correct problems with the M250, M260, M280 scanners, a.k.a. eseek scanner, that is used in the IDWedge or IDWedgePro applications or DL Parsing Scanner SDK. This

06/15/18
9:40 am
IDVisorSentry Installer 1.0.0.8

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-1.0.0.8.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 1.0.0.x.exe and run the installer. you will see a driver installer

06/07/18
3:13 pm
IDWedge Pro Installer 1.0.2.6

This is the full version of the IDWedge Pro software. You can use it in demo-mode without an activation code for 30 days/30 executions. Please contact us for an activation code.  Do not update your code with this Installer, because

05/30/18
2:39 pm
IDParser M280 SDK 3.6

IDParser m280 Relase 3.6 – Change Image capture code to fix bug cause by Win10 May 2018 update Windows IDParser m280 drivers License parsing SDK for m280 ID Scanner with Image Capture Down the this file and unzip to your

06/06/18
3:25 pm
IDParser M260_POS_HID SDK 3.6

New combined Windows Mobile m260, m420, H325, F406 SDK for our drivers License parsing software.  The m420 is our lower cost – weather proof PDF417 barcode scanner, the H325 is a gun/trigger PDF417 barcode scanner and the F406 is a

05/24/18
2:56 pm
IDWedgeBT Keyboard Application Updater 2.5

The IDWedgeBT Keyboard Application Updater requires a special programming cable.  The application has on screen instructions on how to perform the update. The quick guide contains screen shots of the procedure. IDWedgeBT-Application-Upgrade-Quick-Guide-Rev-2.0 Download the archive below and extract/unzip to a

08/10/18
11:53 am
IDWedgeBT SPP Application Updater 3.0

The IDWedgeBT Application Updater requires a special programming cable, and a PC with a serial port, or a USB->Serial adapter.   The application has on screen instructions on how to perform the update. The quick guide contains screen shots of the

05/17/18
4:24 pm
IDWedgeBT HID Bluetooth Keyboard Application Updater 3.5

The IDWedgeBT Application Updater requires a special programming cable and a PC with a serial port, or a USB->Serial adapter.   The application has on screen instructions on how to perform the update. The quick guide contains screen shots of the

05/17/18
11:31 am
IDParser node lock SDK 3.3

New Windows SDK for our node locked drivers License parsing software   Down the this file and unzip it to your PC: IDParser-NodeLock-SDK_3.3.zip You’ll have Visual Studio C# and VB projects with documentation. Unactivated (i.e. Demo) parsing software converts each 3rd

05/11/18
9:09 am
IDParser M280 SDK 3.5

IDParser m280 Relase 3.5 Windows IDParser m280 drivers License parsing SDK for m280 ID Scanner with Image Capture Down the this file and unzip to your PC:IDParser-M280-SDK-3.5.zip You’ll have an executable which requires a pass phrase to run.  Please call

05/08/18
3:38 pm
IDParser Native M260 SDK 3.4

New Windows Native C Library SDK for our drivers License parsing software Down this file, and unzip it to your PC:IDParser-M260-Native-SDK-3.4.zip You’ll have an executable which requires a pass phrase to run.  Please call 800 574 5034 for the pass

05/08/18
2:04 pm
IDWedge version 3.6

New IDWedge version 3.6 software update: Updated to latest parsing and removes card data logging.   Down the this file and unzip it on your PC: IDWedge-FormFiller-3.6.zip You’ll have an executable which requires a pass phrase to run.  Please call

05/07/18
4:44 pm
IDParser M260_POS_HID SDK 3.5

New combined Windows Mobile m260, m420, H325, F406 SDK for our drivers License parsing software.  The m420 is our lower cost – weather proof PDF417 barcode scanner, the H325 is a gun/trigger PDF417 barcode scanner and the F406 is a

05/07/18
3:03 pm
IDVisorSentry Installer 1.0.0.7

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-1.0.0.7.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 1.0.0.x.exe and run the installer. you will see a driver installer

05/03/18
3:49 pm
IDParser M260 SDK Morpho Version 3.2

New Windows SDK for our drivers License parsing software for Morpho:   Down the this file: IDParser-M260_3.2_Morpho-exe.zip   You’ll have an executable which requires a pass phrase to run.  Please call 800 574 5034 for the pass phrase. Enter the

05/03/18
10:46 am
IDParser Cloud SDK 1.11

Visual Studio C# client code which demonstrates web based ID parser. Down this file  IDCloudParser-SDK_v1.11.exe.zip      It is a zip file, so first unzip it. You’ll have an executable which requires a pass phrase to run.  Please call 800 574 5034

05/02/18
12:45 pm
How to submit an Anti-Virus False Positive to Symantec/Norton

Some of the applications written by TokenWorks may trigger a false positive for a virus/trojan/malware from the Symantec suite of products, including Norton Anti-Virus. The TokenWorks apps are installed on the C: drive: C:\Tokenworks\IDVisorSentry C:\Tokenworks\IDVisorSyncConsole C:\Tokenworks\IDWedgePro C:\Tokenworks\AgeVisor C:\Tokenworks\AgeVisorTouch use one

04/24/18
4:20 pm
How to add an exclusion to Windows Defender (Win10)

Some of the applications written by TokenWorks may trigger a false positive for a virus/trojan/malware from the Windows Defender anti-virus software.  To stop these false positives, you can add and exclusion to Defender, and this should stop the false positive

04/24/18
2:56 pm
IDVisorSentry Installer 1.0.0.6

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-1.0.0.6.zip Once you have downloaded the file to a folder on your PC, extract the IDVisorSentry Installer 1.0.0.x.exe and run the installer. you will see a driver installer

04/20/18
3:23 pm
IDWedge Pro Installer 1.0.2.5

This is the full version of the IDWedge Pro software. You can use it in demo-mode without an activation code for 30 days/30 executions. Please contact us for an activation code.  Do not update your code with this Installer, because

04/02/18
3:54 pm
IDParser M260 SDK Morpho Version 3.1

New Windows Mobile SDK for our drivers License parsing software   Down the this file  IDParser M260 3.1 Morpho.exe.exe.zip     It is a zip file, so first unzip it. You’ll have an executable which requires a pass phrase to run. 

03/29/18
3:06 pm
IDWedgePro version 1.0.2.5 beta test updater

The installer below contains 2 files: IDWedgePro.exe and IDWedgePro Help.chm This version of code has the M280 scanner brightness feature and new WCF logic This post is for demonstration and testing, it is not a formal release of IDWedgePro. Download

03/30/18
4:03 pm
Import a certificate into Internet Explorer 11 used with IDWegePro WCF on https

The following procedure will go through all the steps required to import a certificate into IE11.  This is required when using IDWedgePro WCF feature on secured pages (https). For a single user follow this procedure: Import-a-certificate-into-IE11-for-SSL.pdf   To modify a

03/08/18
3:27 pm
IDWedgeKB Serial Port data in the browser with NodeJS

This post will provide all the files and instructions required to demonstrate the IDWedgeKB in Serial Port mode sending data to the browser using NodeJS to host a server written in JavaScript. You can download all the resources required to

04/05/18
11:12 am
IDWedge Pro Installer 1.0.2.5

This is the full version of the IDWedge Pro software. You can use it in demo-mode without an activation code for 30 days/30 executions. Please contact us for an activation code.  Do not update your code with this Installer, because

03/09/18
2:55 pm
AgeVisor POS 2.0.0.5 Installer and Updater

Version 2.0.0.5 has added support for multiple users and supports an external USB relay device.   Below are two different download links.  Please read the directions and chose the most appropriate. The Installer download is for NEW installation or clients

02/26/18
6:13 pm
M280 Brightness Demo

This demo is a modified version of the M280 SDK, that scans a DL and creates a copy of the original image, with a brightness control. You must have the Eseek M280 installed on a PC to use this demo.

02/08/18
3:49 pm
IDVisorSentry Installer 1.0.0.5

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer-1.0.0.5.zip Changes to 1.0.0.5 include: New GUI, add In/Out feature and Vehicle feature, disable pin code on search. Once you have downloaded the file to a folder on

02/01/18
6:15 pm
How to get virtual keyboard to work on Android Samsung Galaxy Tab when paired with IDWedgeBT

How to get virtual keyboard to work (pop up) on Samsung, model SM-T817V (Galaxy Tab S2 Verizon Wi-Fi) after paring with IDWedgeBT Problem: When the IDWedgeBT first pairs with Android tablet, the virtual on-screen keyboard does not work and Pressing the

01/31/18
6:14 pm
IDWedgeKB Serial Port Demonstration

This post will provide all the files and instructions required to demonstrate the IDWedgeKB in Serial Port mode. You can download all the resources required to run the demonstration from this post. Please watch this video to see the demo:

01/10/18
5:12 pm
IDParser M260_POS_HID SDK 3.4

New combined Windows Mobile m260, m420, H325, F406 SDK for our drivers License parsing software.  The m420 is our lower cost – weather proof PDF417 barcode scanner, the H325 is a gun/trigger PDF417 barcode scanner and the F406 is a

01/10/18
2:08 pm
IDWedgeKB User Manual Version 1.12

IDWedgeKB User Manual Version 1.12 released for version 2.4 firmware –  Note: Version 1.10 not published IDWedgeKB-Users-Guide-Version-1.12.pdf   1.10 Upgrade firmware to 2.4, CaC card now uses Class field for paygrade and Endors field for base10 ID# PC 08232017 1.11

01/05/18
12:20 pm
IDParser node lock SDK 3.2

New Windows SDK for our drivers License parsing software (zip file archive of a self extracting archive) Down the this file:  IDParser-NodeLock-SDK-3.2.zip  It is an archive/zip file, so after download, unzip it. You’ll have Visual Studio C# and VB projects with

01/08/18
5:19 pm
IDParser M280 SDK 3.4

IDParser m280 Relase 3.4 Windows IDParser m280 drivers License parsing SDK for m280 ID Scanner with Image Capture Down the this file IDParser-M280-SDK-3.4-exe.zip    It is a zip file, so first unzip it. You’ll have an executable which requires a pass

01/12/18
3:36 pm
Protected: Test Parsing DLLs for Developer

There is no excerpt because this is a protected post.

12/20/17
10:26 am
Problem: Unrecognized Barcode Format Error

Problem: Unrecognized Barcode Format error appears when scanning an ID. Solution: Verify that the Barcode Scanner is set to only read 2D barcodes. If other barcode formats are enabled, the above error message could appear. How to verify the Barcode

12/13/17
1:13 pm
Can I delete a scanned id from the IDVisor Pro ID Scanner?

Q: Can I delete a scanned id from the IDVisor Pro ID Scanner? A: No – There is no individual editing or deleting of records in the IDVisor Pro database as this defeats one of its primary purposes, to serve as

12/06/17
10:55 am
Issue: WCF service is not sending data over HTTPS to IE 11.

Issue: WCF service is not sending data over HTTPS to IE 11. Solution:  Import the Service.pfx into the Trusted Certificates.   Follow these steps below to import the certificate. The screen below shows the data not populating in IE 11

10/25/17
5:13 pm
IDVisorSentry Installer 1.0.0.4

The IDVisorSentry Desktop application is available for download at the link below: IDVisorSentry-Installer_1.0.0.4.zip Changes to 1.0.0.4 include: improve GUI and performance of CR5400 scanner, add the form filler feature   Once you have downloaded the file to a folder on

12/19/17
11:18 am
IDVisor Z22 Software Update – 4.73 Credit Card and Standard Version

IDVisor Z22 Software Update Standard & Credit Card- Version 4.73 This software adds the ability to scan and save credit card data.  We normally do not ship this version with the scanners because most clients have no need to capture

10/19/17
5:56 pm
IDParser M280 SDK 3.2.1

IDParser m280 Relase 3.2.1 Windows IDParser m280 drivers License parsing SDK for m280 ID Scanner with Image Capture Down the this file  IDParser-M280-SDK-3.2.1-exe.exe.zip_     It is a zip file, so first unzip it. You’ll have an executable which requires a

10/17/17
12:02 pm